The clutch disc is a vulnerable part in the driving system of motor vehicles (including cars, motorcycles and other mechanical transmission equipment vehicles). During use, special attention should be paid to the engine running, and the foot should not always be placed on the clutch pedal. Composition of clutch plate: active part: flywheel, pressure plate, clutch cover. Driven part: driven plate, driven shaft.
How often to change the clutch disc of heavy truck?
It is generally replaced once every 50000 km to 80000 km. The following is the introduction of relevant contents: replacement cycle: the replacement cycle of the truck clutch plate is not fixed, and its service life has a great relationship with the driver’s driving habits and driving conditions. It needs to be replaced when the cycle is short, and it is no problem when the cycle is long, and it runs more than 100000 kilometers. Considering that the clutch plate is a high consumption product, it is generally required to replace it after 5 to 8 kilometers.
How to change the truck clutch disc?
1. First, check whether the clutch plate is damaged. If it is damaged, replace it.
2. Remove the clutch plate, remove the clutch plate from the clutch and completely remove it.
3. Clean the clutch plate and clean it with clean oil to avoid polluting the new clutch plate.
4. Install a new clutch plate, install the new clutch plate on the clutch and fix it firmly.
5. Check the clutch plate, check whether the new clutch plate is installed correctly, and ensure that it works normally.
Tip: When replacing the clutch plate, make sure that the new clutch plate is installed correctly and works normally, so as not to affect the normal use of the truck.
Post time: Mar-13-2023